IMPACT SDW - Forced pairing

Zuletzt geändert: Dienstag, 29 September 2026

You can place the headset into forced or 'special' pairing mode by simultaneously pressing the multifunction button and holding the volume toggle switch depressed for five seconds. The LED should then begin to alternately flash blue and red, and then you can simply place the headset onto the base station.

 

You can place the headset into forced or 'special' pairing mode by simultaneously pressing the multifunction button and holding the volume toggle switch depressed for five seconds. The LED should then begin to alternately flash blue and red, and then you can simply place the headset onto the base station.

 

As per normal, three blue flashes indicate successful pairing, and three red flashes will indicate that pairing has failed.

Serie

IMPACT Series

Artikel