EXPAND Vision 3T - Resetting
最終更新: 火曜日, 29 9月 2026
Follow these steps to perform a hardware reset on EXPAND VISION 3T:
Follow these steps to perform a hardware reset on EXPAND VISION 3T:
1. Disconnect the power
2. Pres and hold the reset button on the backplane of the EXPAND Vision 3T with a paperclip
3. Connect the power and release the reset button
4. You will now see on the monitor 7 options - use the paperclip to select "Wipe data/factory reset
5. Press the Power button to reset EV3T
7. You will now see two options - use the paperclip to select "Yes"
8. Press the power button to start the factory reset
9. After the reset you need to pair the remote control
シリーズ
EXPAND Vision 3T
その他のシリーズ
- End of Life Announcement for EPOS EXPAND Vision 3T
- EXPAND Vision 3T - Adjusting the camera
- EXPAND Vision 3T - Changing the volume
- EXPAND Vision 3T - Cleaning the products
- EXPAND Vision 3T - Connecting to a network
- EXPAND Vision 3T - How to connect a screen
- EXPAND Vision 3T - Muting / Unmuting the microphone
- EXPAND Vision 3T - Pairing Bluetooth devices
- EXPAND Vision 3T - Positioning the devices
- EXPAND Vision 3T - Standby mode & waking up
- EXPAND Vision 3T - Updating the firmware
- EXPAND Vision 3T - Using the privacy buttons
- EXPAND Vision 3T Video - Content sharing
- EXPAND Vision 3T Video - How to connect
- EXPAND Vision 3T Video - How to mount
- EXPAND Vision 3T Video - How to provision the video bar and meeting room controller
- EXPAND Vision 3T Video - How to use the privacy buttons
- EXPAND Vision 3T Video - How to use the remote control
- EXPAND Vision 3T Video - Package contents
- EXPAND Vision 3T Video - Proximity Join
- EXPAND Vision 3T Video - Screen Cast