IMPACT SDW - Forced pairing
You can place the headset into forced or 'special' pairing mode by simultaneously pressing the multifunction button and holding the volume toggle switch depressed for five seconds. The LED should then begin to alternately flash blue and red, and then you can simply place the headset onto the base station.
As per normal, three blue flashes indicate successful pairing, and three red flashes will indicate that pairing has failed.
Related Articles
IMPACT 5000 Video - How to adjust the incoming call settings
IMPACT 5000 Video - How to activate a volume limiter
IMPACT 5000 Video - How to adjust the radio range
IMPACT 5000 Video - How to adjust the ringtone and ringtone volume
IMPACT 5000 Video - How to adjust the audio quality
IMPACT 5000 Video - How to configure a desk phone with the IMPACT SDW 5 BS
IMPACT 5000 Video - How to transfer a call
IMPACT 5000 Video - How to control volume and mute the microphone
IMPACT 5000 Video - How to control conference calls
IMPACT 5000 Video- How to control calls
IMPACT 5000 Video - How to control multiple calls
IMPACT 5000 Video - How to control media
IMPACT 5000 Video - How to change the focus device
IMPACT 5000 Video - How to connect a USB headset
IMPACT 5000 Video - How to connect a speakerphone
IMPACT 5000 Video - How to switch between the base station and the DECT dongle
IMPACT 5000 Video - How to invoke Microsoft Teams
IMPACT 5000 Video - How to use the headband with the SDW 10 HS
IMPACT 5000 Video - How to use the ear hook with the SDW 10 HS
IMPACT 5000 Video - How to power the headset on/off
IMPACT 5000 Video - How to charge
IMPACT 5000 Video - How to use the SDW D1 USB with EPOS Connect
IMPACT 5000 Video - How to pair an SDW headset to the SDW D1 USB
IMPACT 5000 Video - How to connect the UI 10 BL
IMPACT 5000 Video - How to update
IMPACT 5000 Video - How to pair a bluetooth headset
IMPACT 5000 Video - How to pair a mobile device
IMPACT 5000 Video - Package contents
IMPACT SDW D1 USB Video - Package contents
IMPACT SDW - Echo in the speaker during call with a desk phone
IMPACT SDW - Overview of the BTD 800 USB Dongle LEDs with the SDW series
IMPACT SDW - Restoring factory default settings (Reset)
IMPACT SDW - Connecting an optional USB headset or speaker
IMPACT SDW - Overview of the dongle BTD 800 USB LED
IMPACT SDW - Using the headset with the ear hook
IMPACT SDW - Swapping the direction of the volume buttons
IMPACT SDW - Overview of the base station LEDs
IMPACT SDW - Package contents
IMPACT SDW - Enabling/Disabling voice prompts
IMPACT SDW - Managing multiple calls
IMPACT SDW - Connecting the base station to an optional mechanical handset lifter
IMPACT SDW - Overview of the headset SDW 30 HS
IMPACT SDW - Adjusting the ring tone and ring tones volume of the base station - DIP switch 7 and 8
IMPACT SDW - Resetting
IMPACT SDW - Unable to pair IMPACT SDW D1 dongle with a SDW headset
IMPACT SDW - Firmware update fails
IMPACT SDW - Adjusting the microphone volume
IMPACT SDW - Replacing the battery of the SDW 30/60 HS headset
IMPACT SDW - Auto Link mode
IMPACT SDW - Adjusting the audio signal for desk phone using the ABC switch - SDW 5 BS only
IMPACT SDW - Adjusting and wearing the headset SDW 30 HS I SDW 60 HS
IMPACT SDW - Adjusting how the system handles incoming calls with DIP switch 4
IMPACT SDW - Cleaning and maintaining the headset
IMPACT SDW - Charging the headset
IMPACT SDW - Configuring the desk phone with DIP switches 1 and 2 (SDW 5 BS only)
IMPACT SDW - Call handling (Making a call)
IMPACT SDW - Assembling and wearing the headset SDW 10 HS
IMPACT SDW - Call handling (Transferring calls to connected devices)
IMPACT SDW - Connecting the base station to an optional electronic hook switch control (EHS)
IMPACT SDW - Adjusting the audio Quality with DIP switch 5
IMPACT SDW - Connecting the base station
IMPACT SDW - Connecting the base station to main power supply
IMPACT SDW - Call handling (Ending a call)
IMPACT SDW - Labeling the headset
IMPACT SDW - Configuring the headset system
IMPACT SDW - Listening to media using the headset
IMPACT SDW - Pairing a mobile phone or tablet via Bluetooth
IMPACT SDW - Adjusting the radio range with DIP switch 3
IMPACT SDW - Connecting the base station to a fixed line phone - SDW 5 BS only
IMPACT SDW - Detaching headband, ear hook or neckband
IMPACT SDW - Using the motion sensor
IMPACT SDW - Overview of the headset LED
IMPACT SDW - Limiting the volume with DIP switch 6
IMPACT SDW - Connecting the base station to a computer
IMPACT SDW - Pairing and charging the headset before first use
IMPACT SDW - Overview of the base station
IMPACT SDW - Overview of the SDW 60 HS
IMPACT SDW - Overview of the busy light (UI 10 BL) LED
IMPACT SDW - Pairing a headset via Bluetooth
IMPACT SDW - Features that require the mains power supply
IMPACT SDW - Using the dictation mode
IMPACT SDW - Switching between DECT Dongle and base station
IMPACT SDW - Overview of the SDW 10 HS
IMPACT SDW - Muting the microphone
IMPACT SDW - Setting up conference call
IMPACT SDW - How to update firmware
IMPACT SDW - Adjusting the volume
IMPACT SDW - Verifying battery life
IMPACT SDW - Sharing a workplace
IMPACT SDW - Using the headset with the neckband
IMPACT SDW - Auto Hook mode  Â
IMPACT SDW - DIP-switch configuration
IMPACT SDW - Switching between interfaces when MSH mode is activated
IMPACT SDW - Overview of the LEDs
View All