EXPAND Vision 1M - Adjusting the camera
Zuletzt geändert: Dienstag, 29 September 2026
You can adjust the angle of the camera physically. Activate the camera e.g. via your UC solution.
You can adjust the angle of the camera physically. Activate the camera e.g. via your UC solution.
- Loosen the affixing screw at the wall mount's bottom a bit.
- Change the camera position:
- slide a little backwards or forwards or
- rotate to the left- or right-hand side or
- move a bit up and down.
You will feel a slight resistance if you reach the maximum angle.
3. Tighten the screw again.
Serie
EXPAND Vision 1M
Artikel
- EXPAND Vision 1M - Changing the camera's pick-up zone
- EXPAND Vision 1M - Cleaning the product
- EXPAND Vision 1M - Connecting the camera
- EXPAND Vision 1M - How to mount
- EXPAND Vision 1M - Joining meetings / calls
- EXPAND Vision 1M - Overview
- EXPAND Vision 1M - Overview of the connections
- EXPAND Vision 1M - Updating the firmware
- EXPAND Vision 1M - Using an optional Kensington lock
- EXPAND Vision 1M - Using the privacy shutter