Category: DECT Headsets11 sections
IMPACT D Series
- IMPACT D Series Product overview
- IMPACT D Series Description
- IMPACT D Series If a problem occurs
- Cleaning and maintaining IMPACT D Series
- IMPACT D Series sharing a workplace
- IMPACT D Series charging the headset
- Making calls using IMPACT D Series
- Configuring IMPACT D Series
- IMPACT D Series adjusting the headset
- IMPACT D Series setting up and connecting the base station
- IMPACT D Series Package Content
- IMPACT D Series Battery removal guide
- D 30 Battery Removal Guide
- How to perform a factory reset with D 10 base station
SDW Product Description
- IMPACT SDW 5016
- SDW overview of the EPOS busy light (UI 10 BL) LED
- SDW connecting the base station
- SDW Connecting the base station to main power supply
- SDW pairing and charging the headset before first use
- SDW Connecting the base station to a fixed line phone - SDW 5 BS only
- EPOS - SDW connecting the base station to an optional mechanical handset lifter
- SDW Connecting the base station to an optional electronic hook switch control (EHS)
- SDW connecting the base station to a computer
- SDW pairing a mobile phone or tablet via Bluetooth
- SDW pairing a headset via Bluetooth
- EPOS - SDW connecting an optional USB headset or speaker
- SDW assembling and wearing the headset SDW 10 HS
- EPOS - SDW using the headset with the ear hook
- Using the SDW headset with the neckband
- SDW Detaching headband, ear hook or neckband
- SDW Adjusting and wearing the headset SDW 30 HS I SDW 60 HS
- SDW Labeling the headset
- SDW Configuring the headset system
- SDW configuration for the desk phone - DIP switches 1 and 2 - SDW 5 BS only
- SDW Adjusting the radio range - DIP switch 3
- SDW Adjust how the system handles incoming calls - DIP switch 4
- SDW Adjusting the audio Quality - DIP switch 5
- SDW Limiting the volume - DIP switch 6
- EPOS - SDW Adjusting the ring tone and ring tones volume of the base station - DIP switch 7 and 8
- SDW adjusting the audio signal for desk phone using the ABC switch - SDW 5 BS only
- SDW adjusting the transmission volume
- EPOS - SDW using the headset (Enabling/Disabling voice prompts)
- SDW using the headset (muting the microphone)
- EPOS - SDW using the headset (Swapping the direction of the volume buttons)
- SDW using the headset (Adjusting the volume)
- SDW verifying battery life
- SDW Call handling (Making a call)
- SDW Call handling (Transferring calls to connected devices)
- SDW Call handling (Ending a call)
- IMPACT SDW 5035
- IMPACT SDW 5036
- IMPACT SDW 5065
- IMPACT SDW 5066
- EPOS - SDW Managing multiple calls - two calls from two audio sources
- SDW Setting up conference call
- SDW using the dictation mode (Green LED on MFB the base)
- SDW headset using the motion sensor
- SDW Charging the headset
- SDW Sharing a workplace
- SDW Switching between DECT Dongle and base station
- SDW Cleaning and maintaining the headset
- SDW Update the firmware
- EPOS - SDW Restoring factory default settings (Reset)
- SDW Specifications
- SDW Headset with Components
- EPOS - SDW Package Contents
- EPOS - IMPACT SDW D1 USB - DECT Dongle
- IMPACT SDW 5061
- IMPACT SDW 5031
- IMPACT SDW 5011
- IMPACT SDW 5015
- SDW overview of the 10 HS
- EPOS - SDW overview of the 30 HS
- SDW overview of the 60 HS
- EPOS - SDW overview of the base station LED's
- SDW overview of the headset LED
- EPOS - SDW overview of the dongle (BTD 800 USB) LED
- SDW overview of the base station
Troubleshooting
- SDW reset picture
- SDW Series features that require the mains power supply
- How to check if ADAPT 660 (MB 660) is connected to the BTD 800 dongle plugged in SDW 5 base station
- SDW 30/60 HS - Replacing the battery
- SDW Fails to Update
IMPACT DW Series
- EPOS DW replacing the headset's rechargeable battery
- EPOS DW Replacing the ear pads
- Cleaning and maintaining the DW system
- DW Using the headset with a third party base station (DECT-GAP telephone)
- DW Sharing a workplace
- DW Charging and storing the Headset
- DW Holding a conference call
- DW Calling via the computer using the headset
- DW Calling via the fixed line phone using the headset
- DW Switching between Phone and PC mode
- DW Leaving the DECT range
- DW Muting the microphone
- EPOS DW Changing the direction of the volume up/down function
- DW Adjusting the volume
- DW Adjusting the Audio
- DW Pairing the headset and the base station
- DW Adjusting the headset system using the DIP-Switches
- EPOS DW Labeling the Headset
- DW Adjusting the Headset
- DW Charging battery and Talk time
- DW Connecting the base station to a computer
- DW Connecting the base station to a fixed line phone
- DW Setting up the base station
- DW Overview of the LEDs
- DW Overview of the buttons
- DW Package contents
IMPACT SD Series
- SD Replacing the battery
- SD Replacing the ear pads
- SD Cleaning and maintaining the headset
- SD Switching the headset off during extended non-use
- SD Charging the headset using the CH10
- SD Charing the headset and storing the system
- SD Holding a conference call
- SD Call using the computer via a headset
- Call via fixed phone line using the headset
- SD Switching between PC and Phone
- SD Leaving DECT range
- SD Adjusting the volume
- SD Adjusting the automatic audio transmission "Auto Audio"
- SD Adjusting the volume
- SD Adjusting the audio signal by means of the dial tone
- SD Pairing the headset and base station
- SD Labeling the headset
- SD Individually adjusting the headset
- SD Charging the headset
- SD Connecting Base station to a PC
- SD Connecting the base station to a fixed phone line
Common Settings/Troubleshooting
EHS Cables
- CEHS-AL 01 Quick Guide
- CEHS-CI 02 Quick Guide
- CEHS-DHSG Quick Guide
- AL-SATA 01 Quick Guide
- CEHS-MB 01 Quick Guide
- CEHS-NEC 02 Quick Guide
- CEHS-SP 01 Quick Guide