GSP 370 - How to clear pairing list

  1. Make sure that EPOS Gaming Suite is running in your PC and open

  2. Both the dongle and GSP 370 need to be unplugged from your PC

  3. GSP 370 needs to be powered off

  4. Plug in the dongle and wait for 6-10 seconds. Then unplug the dongle from your PC, and re-plug

  5. Power on the headset

  6. If the LED flashes red and blue, the headset is looking for the dongle to be paired

  7. If LED gets to emit a steady blue light on the headset, paring was successful. GSP 370 shall be available in Gaming Suite again after about 1 minute