EXPAND Vision 3T - Reset

Follow these steps to perform a hardware reset on EXPAND VISION 3T:

1. Disconnect the power
2. Pres and hold the reset button on the backplane of the EXPAND Vision 3T with a paperclip
3. Connect the power and release the reset button
4. You will now see on the monitor 7 options - use the paperclip to select "Wipe data/factory reset

5. Press the Power button to reset EV3T
7. You will now see two options - use the paperclip to select "Yes"

8. Press the power button to start the factory reset
9. After the reset you need to pair the remote control